Right-Click and access the Propriety of the Ethernet Icon the Ethernet port connected to the printer 3. Select the proper COM port and baud rate to establish communication. Please find the supplied disc for the latest software. Please refer to the printed Self-Test page for the code number support. Check the power source.
|Date Added:||20 October 2013|
|File Size:||45.3 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Enter the reserved IP Address and the name of your Printer. Right-Click and access the Propriety of the Ethernet Icon the Ethernet port connected to the tysso prp-250 3.
TYSSO PRP-250 RECEIPT PRINTER
Access the application software. If you find the Customer display is not functining, please follow the steps as follows: Before Setup It may need to re-configure the printer prior to the codepage setup tysso prp-250.
Now you can open the web browser and type the IP address of your PRP as listed in the self-test paper. User can perform the self-test again to exam the new tysso prp-250 setting. In general, the tysso prp-250 should pre-installed and configured prior to the whole POS system is set up.
PRP Receipt Printers – Fametech Inc. (TYSSO)
Then you can use your keyboard now. Turn tysso prp-250 the USB device. Check the power source. How can I configure the Code Page of the Receipt tysso prp-250. Check the power cable of your customer display is properlly connected to the power source if you purchase an optional power adaptor.
tyysso Please find the supplied disc for the latest software. Do your pos terminals come with POS software preinstalled? When connecting the printer to the Tysso prp-250 PC, you can: Select LPT1 as the printer port to establish communication.
You can what suit you depending on tysso prp-250 POS system you purchased.
The POS terminal will initiate the device detection and install the driver automitacilly tysso prp-250 the keyboard is detected. Release the Paper Feed Button. USB type and RS Select the proper COM port and tysso prp-250 rate to establish communication. Please tyaso to the printed Self-Test page for the code tysso prp-250 support. Perform Self-test to acquire the IP address of your printer 1.
Incorrect port or code command set might be the reasons that your customer display can not function as your wish. Connect your printer to your PC 3. The Customer Display is not Functing. Press and hold the Paper Feed Button. Tysso prp-250 possible, perform test procedure. Install Driver or INF afterwards. Exit your ppr-250 software.
Tysso prp-250 sure to assign the IP address of the Host PC under the same subnet as your Printer Now you can turn on the printer and install the driver, tyssk the printing works. Be sure to Turn-Off and Turn-On the printer again to initiate the printer with new codepage setting. Access the control panel of your Tysso prp-250 PC. Follow the instructions to install the utility. User can enter the codepage number into the field manually.